Fujitsu HX2560 M1 User Manual page 76

HX2560 M1/HX2560 M2 User's Manual
8. Install the GPU card to the right side GPU bracket.
Figure 6-28. Installing GPU Cards into the Right side GPU Bracke
Screws for NVIDIA Tesla
Note: When installing the Brakect E,
Secure the brakect E to the right side GPU bracket with the 3 screws. (see
figure below).
Rear side
9. In case of connecting the GPU power cable to the serverboard,
Connect the 8 pin connector of the GPU power cable to the serverboard (JPW3,4) or
the PDB (CN602, CN603).
Note: When installing Xeon Phi coprocessor 7120P/3120P, connect two GPU power
cables for each card.
Inser the GPU cards with bracket into
the left GPU Bracket.
Screws for Intel
Xeon Phi
6-22
Screws
Screws