Fujitsu HX2560 M1 User Manual page 106

HX2560 M1/HX2560 M2
User's Manual
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event
log is full. The options are Do Nothing and Erase Immediately.
BMC Network Configuration

LAN Channel 1: This feature allows the user to configure the settings for LAN1 Port.
Update IPMI LAN Configuration
This feature allows the user to decide if the BIOS should configure the IPMI setting at next
system boot. The options are No and Yes. If the option is set to Yes, the user is allow to
configure the IPMI settings at next system boot:
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If
Static is selected, you will need to know the IP address of this computer and enter it to
the system manually in the field. If DHCP is selected, the BIOS will search for a DHCP
(Dynamic Host Configuration Protocol) server in the network that is attached to and
request the next available IP address for this computer. The options are DHCP and Static.
The following items are assigned IP addresses automatically if DHCP is selected, or can
be configured manually if Static is selected.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal and
in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are 6 two-
digit hexadecimal numbers.
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
7-26