Fujitsu HX2560 M1 User Manual page 100

HX2560 M1/HX2560 M2
User's Manual
Parity
A parity bit can be sent along with regular data bits to detect data transmission errors.
Select Even if the parity bit is set to 0, and the number of 1's in data bits is even.
Select Odd if the parity bit is set to 0, and the number of 1's in data bits is odd. Select
None if you do not want to send a parity bit with your data bits in transmission. Select
Mark to add a mark as a parity bit to be sent along with the data bits. Select Space
to add a Space as a parity bit to be sent with your data bits. The options are None,
Even, Odd, Mark and Space.
Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard
serial data communication. Select 2 Stop Bits if slower devices are used. The options
are 1 and 2.
Flow Control
This feature allows the user to set the flow control for Console Redirection to prevent
data loss caused by buffer overflow. Send a "Stop" signal to stop sending data when the
receiving buffer is full. Send a "Start" signal to start sending data when the receiving
buffer is empty. The options are None and Hardware RTS/CTS.
VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals.
The options are Enabled and Disabled.
Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text mes-
sages to a remote server. The options are Disabled and Enabled.
Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are Disabled
and Enabled.
Legacy OS Redirection Resolution
Use this feature to select the number of rows and columns used in Console Redirection
for legacy OS support. The options are 80x24 and 80x25.
Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a terminal
emulator designed for the Windows OS. The options are VT100, LINUX, XTERMR6,
SC0, ESCN, and VT400.
7-20