Fujitsu HX2560 M1 User Manual page 104

HX2560 M1/HX2560 M2
User's Manual
Erasing Settings
Erase Event Log
Select Enabled to erase the SMBIOS (System Management BIOS) Event Log, which is
completed before a event logging is initialized upon system reboot. The options are No
and Yes.
When Log is Full
Select Erase Immediately to immediately erase SMBIOS error event logs that exceed the
limit when the SMBIOS event log is full. Select Do Nothing for the system to do nothing
when the SMBIOS event log is full. The options are Do Nothing and Erase Immediately.
SMBIOS Event Log Standard Settings
Log System Boot Event
Select Enabled to log system boot events. The options are Disabled and Enabled.
MECI (Multiple Event Count Increment)
Enter the increment value for the multiple event counter. Enter a number between 1 to
255. The default setting is 1.
METW (Multiple Event Count Time Window)
This item allows the user to decide how long (in minutes) should the multiple event
counter wait before generating a new event log. Enter a number between 0 to 99. The
default setting is 60.
View SMBIOS Event Log
This item allows the user to view the event in the SMBIOS event log. Select this item and
press <Enter> to view the status of an event in the log.
Date/Time/Error Code/Severity
View System Event Log
This item allows the user to view the event in the system event log. Select this item and
press <Enter> to view the status of an event in the log.
Date/Time/Error Code/Severity
7-24