Intercom Calling - Panasonic KX-TD816NE Features Manual

1.1 General Features

Intercom Calling

Description
Allows the extension user to call another extension user within the system.
Conditions
• Extension numbers are assigned to all extensions by System Programming. An extension
number is programmed to be two, three, or four digits. The ISDN extension number is
programmed to be one, two or three digits.
• Names can be given to extension numbers by System Programming. An extension number
and a name, if programmed, is shown on the display PT during an intercom call.
• DSS buttons permit one-touch access to an extension and provide Busy Lamp Field.
• KX-T7531, KX-T7533, KX-T7536 and KX-T7235 users can make an extension call with
an extension dialling directory on the display.
• After dialling an extension number, the user will hear one of the following:
Ringback tone: indicates that the other extension is being called.
Confirmation tone: indicates that the user can perform Voice Calling.
Busy tone: indicates that the other extension is busy.
Do Not Disturb tone: indicates that the other extension has DND assigned.
Programming Guide References
• [003] Extension Number Set
• [004] Extension Name Set
• [005] Flexible CO Button Assignment
• [012] ISDN Extension Number Set
• [013] ISDN Extension Name Set
• [100] Flexible Numbering
Features Guide References
• Button, Direct Station Selection (DSS)
User Manual References
• 2.2.1 Basic Calling
• 4.1.3 Customising the Buttons
142 Features Guide