Whisper Ohca - Panasonic KX-TD816NE Features Manual

1.1 General Features

Whisper OHCA

Description
When attempting to call a busy extension, Whisper OHCA allows the extension user to notify
the busy party through the handset, which will only be heard by the party. Only KX-T7500
series telephone users can send or receive the Whisper OHCA.
Conditions
• Class of Service programming determines which extensions are able to perform this feature.
• You can select receiving Call Waiting tone, Off-Hook Call Announcement (OHCA),
Whisper OHCA or none of these at your extension. However, the setting may change
depending on each telephone setting or the telephone type as listed below.
Calling Party's
OHCA
COS mode
Disable
Enable (default)
<Example> If the user selects 3 (Whisper OHCA mode);
–If using the KX-T7500 series telephone handset...........Whisper OHCA
–If using the KX-T7500 series telephone SP-PHONE......Call Waiting tone
–Other....................................................................OHCA, Call Waiting tone
• If the Whisper OHCA sender does not use a KX-T7500 series telephone, it will work as
OHCA. If the receiver does not use a KX-T7500 series telephone, the announcement may
also be heard by the other party.
• It is possible to enable the Whisper OHCA by any telephone by system programming.
However, it may not work properly. (E.g. the announcement may be heard by the other
party.)
Programming Guide References
• [100] Flexible Numbering
• [519] Off-Hook Call Announcement (OHCA)
• [990] System Additional Information
256
Called party's call waiting mode
OFF
0: Cancel 1: Call Waiting
Call Waiting Call Waiting
disabled
Call Waiting Call Waiting
disabled
ON
2: OHCA
Call Waiting
tone tone
OHCA, Call
tone Waiting tone
3: Whisper
OHCA
Call Waiting
tone
Whisper OHCA,
OHCA, Call
Waiting tone
Features Guide