Panasonic KX-TD816NE Features Manual page 24

1.1 General Features
Conditions
• A Toll Restriction check is done before ARS is applied.
• ARS works according to the selected dialling plan. Thus, if the user dialled number is not
found in the dialling plan (Leading Digit Tables), the dialled number is sent out by a Local
Access (Automatic line access) Code.
• ARS is not applied to a call specifying a CO line group. In other words, it is possible to
make an outside call by assigning a CO line group directly (ARS Override).
• This feature also applies to Call Forwarding - to CO Line.
• It is possible to select the way to access a CO line to apply ARS, any dialling method or
dialling 9 or pressing Loop-CO (L-CO) button, in program [990], "System Additional
Information, Area 06 - Bit 5."
• ARS with DTMF: When making a call to an ISDN line using the memory dialling, and the
number has a pause in it, the number after the pause will be sent to the line as DTMF signals.
This function is useful when accessing a special network service which can be accessed
only by the DTMF signaling. This function is enabled or disabled in program [990],
"System Additional Information, Area 07 - Bit 1" (default: disable).
Programming Guide References
• [312] ARS Mode
• [313] ARS Time
• [314-321] ARS Leading Digit Entry for Plans 1 through 8
• [322-329] ARS Routing Plans 1 through 8
• [330] ARS Modify Removed Digit
• [331] ARS Modify Added Number
• [990] System Additional Information
Features Guide References
• Line Access, Automatic
User Manual References
• 2.2.1 Basic Calling
24 Features Guide