Charging The Cpw65; Turning The Cpw65 On Or Off; Registering The Cpw65 - Yealink CP935W User Manual

Charging the CPW65

The phone can power to the USB port, so you can directly charge the CPW65 on the phone.
If it is the first time you use the CPW65, you need to fully charge the CPW65 for normal use. If the CPW65 is not in
use, we recommend you charge the CPW65 even when the battery is full.
Procedure
1. Put the CPW65 on the charging cradle.
2. Connect the charging cradle to the USB port on the phone using a USB cable.
During charging, the battery LED indicator on the CPW65 glows solid red. When the battery capacity reaches
100%, the battery LED indicator on the CPW65 will glow solid green.
Note
: If your system administrator disables the USB port of the phone, the phone cannot power to the USB port.

Turning the CPW65 On or Off

To use the CPW65 as the external audio input device, you need to turn the CPW65 on first.
Procedure
1. You can do the following to turn on the CPW65:
Put the CPW65 on a charging cradle or connect to the charging cable, the CPW65 starts up automatically.
l
If you do not charge the CPW65, long tap
l
The battery LED indicator glows green for one second and then goes out.
2. To turn off the CPW65, long tap
then goes out.
Note : When the battery is below 10%, the battery LED indicator flashes red, and it will automatically shut down after 10
minutes of standby; when the low battery reaches 0%, it will automatically shut down.

Registering the CPW65

To ensure good voice quality of the calls on the phones, you can register CPW65 with the phone to use the CPW65
as the external audio input device.
Note
: If you buy CP965-WirelessMic, the CPW65 is registered with the phone by default.
Procedure
1. Go to More > MIC.
2. Select to search for CPW65.
3. Turn on the CPW65.
The CPW65 will enter the registration mode automatically. And the mute LED indicator on the CPW65 fast
flashes yellow.
The CPW65 registers with the phone automatically. If the registration is successful, the mute LED indicator on
the CPW65 goes out and phone screen prompts the CPW65 information: battery, work time and standby time.
on the CPW65 for 3 seconds.
on the CPW65 until the battery LED indicator glows red for 3 seconds and
91
Yealink CP935W User Guide