Page 1
HD Wireless Conference Phone CP935W Quick Start Guide(V1.0)
Page 2
Charging Cradle Power Adapter Quick Start Guide Charging the CP935W Note: • Use Yealink-supplied power adapter (12V/1.25A). A third-party power adapter may damage the wireless conference phone. • Check the charging status in the upper-left corner of the LCD screen.
Off->OK on the LCD screen of the CP935W. Select Mode When the CP935W is powered on for the first time or reset to factory setting, the screen displays DECT Mode and Wi-Fi Mode, choose one and click OK. If you want to switch modes, tap More- >Basic->Phone Mode on the LCD screen of the CP935W.
Page 5
Account Settings (DECT Mode) Before you start using the CP935W, please set up your account via web user interface of the base station. Follow the steps below: 1. Tap More->Status->Base Status->IPv4 on the LCD screen of the CP935W and access the IP address with a browser (the default username and password are admin).
If one of the CP935W is not upgraded successfully, tap More->Basic->upgrade Firmware on the screen of the CP935W, you can check the new firmware and upgrade the CP935W sepa- rately (make sure the provision server is configured).
Page 7
We are not liable for problems with Yealink device arising from • Do not open or mutilate the battery, released electrolyte is corrosive and the use of this product;...
Page 8
As one of the best providers in more than 140 countries and re- gions, Yealink ranks No.1 in the global market share of SIP phone shipments (Global IP Desktop Phone Growth Excellence Leadership Award Report, Frost & Sullivan, 2019).