Winding The Lower Thread - Toyota Super SP200 Series Instruction Manual

Winding the lower thread

Turn off the sewing
machine.
Main power switch
Complete
Return the thread winding
spindle by sliding it in the
direction of the arrow.
Note:
If the thread winding
spindle is not returned,
the needle does not
move and sewing is not
possible.
Remove the bobbin from the thread winding
spindle, and cut the thread.
Press on the foot controller with
your foot to continue winding the
bobbin.
When the bobbin winding becomes
slow, release the foot controller to
stop winding the bobbin.
Foot controller
14
Note:
Prepare a
specially
designed bobbin.
Pull the spool pin upward.
Position the felt, the spool of thread and
the spool cap on the spool pin upward.
Note:
The felt is
already inserted
on the spool
pin.
Thread
winding
spindle
Cut the excess thread above
the bobbin hole.
Cut the thread so that no
excess extends from the
bobbin hole.
Spool cap
Spool of
thread
Felt
spool pin
Thread guide ( )