Toyota Super SP200 Series Instruction Manual page 29

Push up the presser foot holder
until it contacts the presser foot
holder clamp screw. While holding
the presser foot holder in place with
your right hand, turn the needle plate
screwdriver toward yourself with your
left hand to tighten the presser foot
holder clamp screw.
WARNING
Firmly tighten the screw with the included screwdriver, and check that
the needle does not hit the presser foot.
If the screw is loose, the needle will hit the presser foot and break or bend,
which could cause injuries.
Note:
If the presser foot holder is not correctly installed, the needle may hit the
presser foot or the stitching will not be sewn correctly.
Presser foot
holder clamp
screw
29
EN
3