Changing The Presser Foot Holder - Toyota Super SP200 Series Instruction Manual

Changing the presser foot holder

WARNING
Before changing the presser foot holder, use the main power switch
to turn off the sewing machine.
Not doing so could cause injuries.
Removal
Raise the presser foot lever.
Follow the procedure described in
"Changing the presser foot" (refer to
page 26) to remove the presser foot.
Hold the presser foot holder with your
right hand, and then turn the needle
plate screwdriver toward the back of
the machine with your left hand to
loosen the presser foot holder clamp
screw.
Installation
Raise the presser foot lever.
Align the presser foot holder with the
presser bar.
28
Presser foot
holder clamp
screw
Presser foot
holder
Needle plate
screwdriver
Presser bar
Presser foot
holder clamp
screw
Presser foot
holder