Winding The Lower Thread - Toyota SP100 Series Instruction Manual

Winding the lower thread

1 1
sewing machine.
Main power switch
Complete
10
1 Return the thread
winding spindle by
sliding it in the direction
of the arrow.
Note
If the thread winding
spindle is not returned,
the needle does not
move and sewing is
not possible.
2 Remove the bobbin from the thread winding
spindle, and cut the thread.
9
1 Press on the foot controller with
your foot to continue winding the
bobbin.
2 When the bobbin winding
becomes slow, release the foot
controller to stop winding the
bobbin.
Foot controller
14
2
Pull up the spool pin.
Position the spool of thread and the
spool cap on to the spool pin.
Thread
winding
2
spindle
1
8
Note:
Prepare a bobbin
for this machine.
Spool cap
Spool of thread
spool pin
Thread guide (
Cut the excess thread
above the bobbin hole.
* Cut the thread so that no
excess extends from the
bobbin hole.
3
)