Installation Of Battery For Winding The Lower Thread - Toyota SP200 Series Instruction Manual

Installation of battery for winding the lower thread

A battery is supplied as one of the accessories.
Before winding the lower thread, install it in the battery
holder on back of sewing machine.
Caution
When the machine is not used for an
extended period, remove the battery.
1
Pull the battery holder cover out as
the arrow.
2
Install the battery while confirming
polarity of it.
Attach battery holder cover.
Note:
Refer to page 49 when purchasing
or changing batteries.
(Alkaline 1.5 V, Mignon/AA/LR6)
Make sure that the thread winding
spindle rotates by turning the thread
winding switch on by pushing in the
direction of arrow.
Note:
Thread winding spindle rotates while
pushing the switch to the left.
Battery holder cover
Thread winding switch
2
Battery holder
13