Toyota Super SP200 Series Instruction Manual page 24

WARNING
Before turning the pattern selection dial, use the main power switch
to turn off the sewing machine.
Not doing so could cause an injury.
When sewing patterns A to K
Turn the dial until the desired
pattern aligns with the mark
above the dial.
Turn the stitch length dial
until
above the dial.
The stitch length is fixed at 3 mm
(0.14 inch) and cannot be adjusted.
Pattern
selection Application
dial No.
A
Reinforced straight
stitch
(left side)
B
Reinforced straight
stitch
(center)
C
Decorative stitch
Double overlock
D
Decorative stitch
E
Decorative stitch
F
Decorative stitch
24
aligns with the mark
Stitch length dial
(recommended Presser foot
setting)
Zigzag sewing
Stitch length dial
Pattern
selection dial
Pattern
selection
dial No.
G
H
I
foot
J
K
Mark above dial
Turn to the left
Stitch length dial
Application (recommended
setting)
Decorative stitch
Overlock
Decorative stitch
Overlock
Decorative stitch
Reinforced
zigzag stitch
(medium)
Reinforced
zigzag stitch
(large)
Mark above dial
Presser foot
Zigzag sewing
foot