Unsuitable Environments (May 2020) - Q-Lab Q-SUN Xe-3 Series Quick Setup Manual

Section 4. Operating Environment

4.2 Unsuitable Environments (May 2020)

Salt Fog or Other Airborne Contamination
● Operating a Q-SUN tester in an unsuitable environment will void the warranty.
● DO NOT install Q-SUN testers in a room with corrosion chambers
● DO NOT locate a Q-SUN tester in a room with machines or processes that generate dust,
particles, vapors, gases, etc
Figure 4.2a: Do not install testers in a room
with corrosion chambers.
Uncontrolled Temperature and Humidity
● Do not operate the tester in a room with uncontrolled temperature and humidity
● Do not locate tester near sources of cold or hot air
12
(Figure 4.2b).
X
(Figure
X
Figure 4.2c: Do not locate testers near open windows.
(Figure 4.2a).
Figure 4.2b: Do not locate testers in a room
with airborne dust, particles, or gases.
(Figure
4.2d).
X
4.2c).