Chapter 2 - Printer Installation
This printer model has the following print modes:
Thermal Transfer (TT):
Direct Thermal (DT):
2-1. Ribbon Installation
1. Place the printer onto a
smooth surface, and open
the top cover.
2. Loosen and then lift the
upper print mechanism by
pressing the locking tensons.
3. Take out the ribbon supply
shaft and rewind shaft.
4. Place the new ribbon roll
onto the ribbon supply shaft.
5. Feed the ribbon from the
Ribbon Supply Shaft under
the Print Head.
6. Wrap the ribbon around the
Ribbon Shaft and stick the
ribbon onto the Empty
Ribbon Roll Core.
7. Firmly close the upper print
mechanism.
When printing, ribbon must be installed to transfer the print contents onto the media.
When printing, no ribbon is necessary; it only requires direct thermal media.
13