Setting Clock And Calendar - Oregon Scientific RMR966PA Instruction Manual

1. Clock with Second
---------------------------
Indoor Temperature
2. Clock with Weekday
---------------------------------------------
Day-Month
3. Clock with Weekday
--------------------------------------------------------
Clock (2nd Zone-time)
4. Clock with Weekday (2nd Zone-time)
--------------------------------------------------------
Calendar (2nd Zone-time)
SETTING THE CLOCK AND CALENDAR
MANUALLY
When the automatic radio reception is disabled, the main unit can
be set manually. Set the Clock and Calendar by following the
procedures below:
1. Press and hold [MODE] for 2 seconds. The 2nd Zone-time
hour offset will start flashing.
2. Enter the hour-offset by using [
to confirm the entry.
3. Follow the same procedures to set the 12/24-format, hour,
minutes, year, "mm:dd" or "dd:mm" calendar display format,
month, day, display languages and hourly chime on/off mode.
4. Press [MODE] to save the changes and exit the setting mode.
If changes are made after the minute adjustment, the value of
seconds will be reset and start from zero.
5. For the day-of-week you can select among 5 languages —
English (E), French (F), German (D), Italian (I) and Spanish
(S).
8
] or [ ]. Press [MODE]