BATTERY INSTALLATION : REMOTE UNIT
1.
Place both main and remote units as close as possible to each
other.
2.
Remove the screws on the battery door of the remote unit.
3.
Select the units of measurement for the temperature display on
the °C/°F slide switch.
4.
Install 2 batteries (UM-4 or "AAA" size 1.5V) strictly according
to the polarities shown.
5.
Insert batteries or press the reset button of the main unit.
6.
Replace the battery compartment door and secure its screws.
7.
Position the remote sensor and main unit within effective
transmission range, which in usual circumstances, is 30 meters.
Though the sensor is weather resistant, and is meant for use outside,
it should be placed away from direct sunlight, rain, or snow.
Note: The effective range may be limited by building materials and
the position of either the main unit or remote sensors. Try various
set-up arrangements for best result.
REMOTE UNIT : WALL-MOUNTING OR
TABLE STANDING
Wall-mount
FEATURES
Section I — Radio-Controlled Digital
Calendar Clock
6
Table Stand