Download Print this page

Setting Calendar Clock & Alarm; Snooze Function; How To Reset - Oregon Scientific JM828WF User Manual

Wide-screen weather forecast rf clock with thermometer

Advertisement

HOW TO SET THE CALENDAR CLOCK
MANUALLY
When the calendar is displayed, press CLOCK for two seconds.
The month digits will start to blink.
Enter the month using the [
either button to rapidly increase or decrease the value.
Press CLOCK to confirm and proceed to set the day. Again,
once the day is set press CLOCK to proceed to the language
display.
Days of the week can be indicated as an abbrevistion in five
different language, (E) for English, (D) for German, (F) for
French, (I) for Italian, (S) for Spanish.
To choose a language use the
Language
Monday
Tuesday
Wednesday
English
Dutch
French
Italian
Spanish
Press CLOCK to proceed to the hour and minute functions.
TO SET AND ACTIVATE THE ALARM
The CALENDAR mode and the ALARM mode share the same
section of the display.
When in CALENDAR mode, press ALARM button to enter
ALARM mode, the alarm time is displayed.
To set the alarm-time, press and hold ALARM for two seconds,
the alarm time will flash.
Enter the value for the hour digits. To confirm, press ALARM
and proceed to the minute digits. Again, press ALARM to confirm.
Now, the alarm should be activated.
To deactivate the alarm, press ALARM once.
ALARM AND SNOOZE FUNCTION
When the alarm function is active, the unit will alarm at the set
time.
Resulting from the crescendo function, the alarm initially starts
gently and increases in intensity in three stages. Without inter-
ruption, the alarm will activate for one minute.
To stop the alarm, press any key. However, if the SNOOZE
button is pressed, the SNOOZE function will be triggered. The
alarm will stop for eight minutes before activates again.
JM828WF-GB R2
] and [
] buttons. Hold down
or
button.
Thursday
Friday
Saturday
Sunday
3
INDOOR TEMPERATURE
The JM828WF displays temperature in Centigrade (°C), and is
capable of measuring temperatures within the -5°C and +50°C
range. If the temperature goes above or below these levels, the
display will show "-5°C" or "+50°C".
HOW TO READ THE PRESSURE TREND
The JM828WF gives a pressure trend for the last hour. As illus-
trated below, a rising trend (arrow) indicates improving weather.
Deteriorating weather conditions are indicated with a falling
trend (arrow).
Arrow
Indicator
Pressure
Rising
Trend
WEATHER FORECAST FUNCTION
The JM828WF detects barometric pressure changes and displays
the illustrated weather symbols that indicate weather forecasts
for 12 to 24 hours. The radius of the forecast is approximately 30
- 50 km.
Indicator
displays on
the unit
Forecast
Sunny
Slightly Cloudy
Important:
1. The accuracy of weather forecasting, when only using pres-
sure trends, is approximately 70 to 75 percent.
2. The weather forecast symbols may not reflect current weather
condition. The symbols are forecasting the future.
3. A 'SUNNY' forecast covering the nighttime reflects fine
clear weather.
HOW TO RESET THE UNIT
Press RESET to return all settings to the factory values, which
are 1-1 (1st of January) for date, 12:00 for time and 06:00 for the
alarm, which will be deactivated.
The button is required only when the unit is not operating in a
favorable way, such as in the rare case of a malfunction.
3
8/31/04, 3:38 PM
Steady
Falling
Cloudy
Rainy

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Jm828wfu