Advertisement
This product can provide you with weather information through an all-in-one sensor with high levels of accuracy. Download the dedicated app to set up your weather station and experience all of the features of the WMR500. The App remembers the data for a time range for you to monitor and analyze the weather status. The base station is compatible with other weather sensors. To purchase additional sensors, please contact your local retailer.
NOTE
Please read this user manual before using your product and keep it for future reference. For the complete operation instructions, please visit http://global.oregonscientific.com/customerSupport.php.
This product can work with other sensors to maximize the performance of your weather station.
Optional wireless remote sensors (Oregon Scientific brand) such as those listed below can be purchased separately. For more information, please contact your local retailer.* Please visit our website at www.oregonscientific.com for more details about these sensors.
* Features and accessories will not be available in all countries.
A debris collector is located under the rain collector and fixed by fiber tape. Unscrew it and remove the tape before first time using.
NOTE
Insert the 4 AA batteries (included) to the MAIN UNIT battery compartment, matching the polarity symbols (+ and -) marked inside.
(Optional) Install 4 AA batteries (not included) to the DUST SENSOR battery compartment for back-up usage, matching the polarity symbols (+ and -) marked inside.
NOTE
The sensor is capable of transmitting data to the base station wirelessly within an approximate operating range of 300 m (1000 feet). Ideal locations for the sensor would be in any location on the roof of a building that is in an open area away from trees or other obstructions preventing from the wind flow for an accurate reading. Additionally, locate the sensor in direct sunlight for optimal power supply to the solar panel.
Solar panel facing: | If you reside in the: |
North | Southern Hemisphere |
South | Northern Hemisphere |
Secure the all-in-one sensor connector in the desired location:
NOTE
To add a new sensor or replace the sensor
To remove a sensor
NOTE
You can view the weather contents and weather conditions, set the altitude, select the display units, and review the history data by monthly, weekly, daily and hourly from different sensor channel on the App.
Download the App
Scan the QR code or search "Smart Living WMR500" to find the App and download on your smart device. The App is available on both Apple App Store and Google Play.
Join the Wi-Fi network
NOTE
Always keep Wi-Fi connected for the weather station to store data to the server.
The main unit will automatically synchronize the clock time when connected with our server and App via Wi-Fi.
You can also set the language (English, French, German, Italian, Spanish), time zone (-12 to 14) and hour format (12/24 hr) on the App.
Following icons illustrate how the moon will appear on the base station.
New Moon | Full Moon | ||
Waxing Crescent | Waning Gibbous | ||
First quarter | Third quarter | ||
Waxing Gibbous | Waning Crescent |
NOTE
The moon phase displays in opposite orientation if you are in southern hemisphere.
The WMR500 weather station display and WMR500 app shows the weather forecast within a 30-50 km (19-31 mile) radius. The forecast predicts 12 - 24 hours out.
ICON | DESCRIPTION |
Sunny | |
Partly cloudy | |
Cloudy | |
Rainy | |
Snowy |
You can view the current indoor/outdoor temperature/heat index, humidity, dew-point and the max/min memories on the base station. Select the temperature unit on App: oC (for EU)/oF(for US).
To view current temperature, heat index and TODAY MAX/MIN readings on the device:
To view humidity, TODAY MAX/MIN and dew-point readings on the device:
NOTE The heat index provides an indication on how hot it feels based on air temperature and relative humidity.
NOTE The dew point advises at what temperature condensation will form.
The trend lines are shown next to the temperature and humidity readings. The trend is shown as follows:
RISING | STEADY | FALLING |
You can view and set the numeric wind speed with maximum memory display on our dedicated App.
Select the wind units on the App.
View on the device:
The base station provides wind speed and wind direction information.
To read the wind direction, find the compass point is pointing to.
To select wind display mode:
Press MODE on wind area to toggle between:
The wind level is shown by a series of text icon:
LIGHT | MODERATE | STRONG | STORM |
2 -8 mph (3-13 km/h) | 9-25 mph (14-41 km/h) | 26-54 mph (42-87 km/h) | >55 mph (>88 km/h) |
To read the wind direction:
Status | Wind Direction Indicator | Meaning |
GUST | Real-time wind direction | |
AVG | Real-time average wind direction | |
AVG | (Max 6 sets) | Wind direction of last hour |
To view today maximum wind speed and minimum wind chill readings:
NOTE
The wind chill factor is based on the combined effects of temperature and wind speed.
The station is capable of displaying the UV index, the current or past 24 hours of rainfall, max rain rate, barometric pressure and air quality readings.
To view the recorded rainfall/rain rate of the current hour or past 24 hours:
Select the measurement unit for the rainfall/rain rate on the App:
To view the UV reading:
To view the barometric pressure reading:
To view pressure trend:
The barometric pressure trend icons are based on recent sensor readings. The trend lines are shown next to the pressure readings. The trend is shown as follows:
RISING | STEADY | FALLING |
Select the measurement unit for the barometer on the App:
Set the altitude level compensation:
The altitude reflects the distance from sea level at your position. You can set the altitude level compensation for the barometric pressure readings on the App.
NOTE When altitude is set to 0 meter, the pressure reading is the local pressure. If the altitude is set to the current location, the new pressure reading is an offset pressure to the sea level.
To view the PM reading:
Select the measurement unit ppm or ug/m3 for the PM on the App.
Press any button on the base station to activate the backlight.
Press and hold and together for 5 seconds to return the device to default settings.
*DO NOT RESET WITHOUT FIRST REMOVING YOUR DEVICE IN THE APP
Maintain the Rain Gauge
Clean the hole of the rain collector and the debris collector for maintaining accuracy is very important. Unscrew the debris collector and clean the dirt by water periodically.
Maintain the Wind Sensor
If the wind cup doesn't spin in the wind or does not spin as fast as they should. Remove the wind cup and clear out all bugs, spider webs or debris.
NOTE Do not apply any fluid lubricant on the shaft and bearing. It probably breaks the inner electronic components.
Dimension (L x W x H) | 180 x 90 x 160 mm (7 x 3.54 x 6.3 inches) |
Weight | 427.5 g (0.94 lbs) without battery |
Battery | 4 x 1.5 V AA batteries |
AC/DC Adapter | Input: 100-240 V, 50-60 Hz 300 mA Output: DC 5V, 1000 mA |
Dimension (L x W x H) | 385 x 195 x 315 mm (15.16 x 7.68 x 12.4 inches) |
Weight | 1139 g (2.51 lbs) without battery |
RF transmission frequency | EU: 868mhz, US: 915mhz |
No. of channel | 3 |
RF transmission range | 250 - 300 m (internal antenna) |
Transmission Cycle | 15 seconds |
Battery | 4 x 1.5 V AA + 4 x 1.5 V AA (optional for dust sensor) |
Battery life | with dust sensor: 6 months (8 x 1.5 V AA) without dust sensor: 12 months (4 x 1.5 V AA) |
Unit | mb, inHg, mmHg and hPa |
Measuring range | 700 – 1050 hPa |
Accuracy | +/- 7 hP a |
Altitude setting | Sea level User setting for offset pressure to sea level |
Weather display | Sunny, Partly Cloudy, Cloudy, Rainy and Snowy |
Temperature unit | °C / °F (°C for EU, °F for US) |
Measuring Range | -5 to 50°C (23 – 122°F) |
Accuracy | 0 – 40°C (32 – 104°F): +/-1°C (+/- 2°F) -5 to 0°C (23 – 32.0°F): +/-2°C (+/- 4°F) 40 – 50°C (104 – 122°F): +/-2°C (+/- 4°F) |
Resolution | 0.1°C (0.2°F) |
Memory | Current, Min. and Max. |
Measuring Range | 25% - 90% RH |
Accuracy | 40% - 80% RH: +/-5% RH 25% - 40% RH and 80%- 90 %RH: +/-7% RH |
Resolution | 1% |
Memory | Current, Min and Max |
Temp. unit | °C / °F (°C for EU, °F for US) |
Measuring Range | -30 to 60°C (-22 to 140°F) |
Accuracy | -20 to 0°C: +/-2.0°C (+/- 4.0°F) 0 – 40°C: +/-1.0°C (+/- 2.0°F) 40 – 50°C: +/-2.0°C (+/- 4.0°F) 50 – 60°C: +/- 3.0°C (+/- 6.0°F) |
Temperature resolution | 0.1°C (0.2°F) |
Memory | Current, Min and Max |
Wind speed unit | m/s, knots, kph, mph |
Speed accuracy | 2 - 10 m/s (+/-2 m/s) 10 - 56 m/s (+/- 10%) |
Direction resolution | 22.5 degree |
Memory | Max wind speed |
Rainfall unit | mm, inch (mm for EU, inch for US) |
Rain rate unit | mm/hr and inch/hr |
Measuring range for rainfall | 0 mm to 9999 mm (0-393.6 inches) |
Measuring range for rain rate | 0, 0.04 in/hr (1mm/hr) to 40 in/hr (1016 mm/hr) |
Accuracy | 0 - 15 mm (0 - 0.6")/hr: +/- 1 mm/hr (0.04") 15 - 991 mm/hr (0.6 - 39"): +/- 10% |
Memory | Past 24 hrs, hourly from last memory reset |
NOTE
The technical specifications for this product and the contents of the user manual are subject to change without notice.
NOTE
Features and accessories will not be available in all countries. For more information, please contact your local retailer. To download an electronic version of the user manual, please visit http://global.oregonscientific.com/customerSupport.php.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Oregon Scientific WMR500 - Professional all-in-one Weather Station Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the WMR500 that isn't answered in the manual? Leave your question here.