Maximum And Minimum Temperature - Oregon Scientific RMR966PA Instruction Manual

3. Transmission path is blocked with obstacles and interference
from the surroundings.
Suggested Solution: Shorten the distance (e.g., move the main
unit closer to the window) or relocate the units when necessary.
MAXIMUM AND MINIMUM
TEMPERATURE
The maximum and minimum indoor-remote temperatures recorded
will be automatically stored in memory. Press [MEM] to toggle
among the current, maximum and minimum indoor or remote
temperature records. The respective "MAX" or "MIN" indicator
will be shown.
To clear the memory, press and hold [MEM] for 2 seconds when
the maximum or minimum record is being displayed. The memory
will be erased and replaced with current temperature until a new
maximum or minimum reading has been recorded.
If the temperature readings recorded are lower or higher the
measuring range, "LLL" or "HHH" will be displayed respectively.
NOTE ON ˚C AND ˚F
The outdoor temperature display on the main unit is dominated by
the selection on the [ ˚C / ˚F ] side switch of the main unit. Whatever
the display unit of the remote sensor is, it will only apply to the
remote sensor itself and the temperature will be automatically
converted to the chosen one of the main unit.
SECTION IV --- Projection
HOW TO USE THE PROJECTION
The projection makes it easier for you to read the indoor temperature
or outdoor temperature and current time at night. To use the feature.
1. Press [SNOOZE/LIGHT] to turn on the projection for
5 seconds. The current time with indoor temperature will be
projected onto the surface the lens is facing.
2. To change to view the outdoor temperature instead of the
outdoor one, press [SNOOZE/LIGHT] again when projection
is on.
3. Adjust the projected image as below.
13