Temperature, Humidity & Pressure; Maximum And Minimum Temperature; How To Use Channel-1 Temperature/ Humidity Alarm - Oregon Scientific BAR122HGLA User Manual

TEMPERATURE, HUMIDITY & PRESSURE
TREND INDICATORS
The temperature-trend, humidity-trend and pressure-trend indicators
show the trends of collected readings. Arrows indicate a rising,
steady or falling trend.
Arrow indicator
Temperature
Rising Steady
Trend
Arrow indicator
Steady
Humidity Trend Rising
Arrow indicator
Pressure Trend Rising Steady
Note: If the reading goes above or below the measuring range of the
main unit or the remote unit ( stated in specification), the display
will show "HHH" or "LLL".
b122hga-e.p65

MAXIMUM AND MINIMUM TEMPERATURE

The maximum and minimum recorded temperature and humidity
readings will automatically be stored in the memory.
To display the maximum and minimum display memory:
1. Select the channel to be checked.
2. Press [MEMORY] once to display the maximum temperature and
humidity and press [MEMORY] again to display minimum
temperature and humidity. The respective indicators, MAX or MIN
Falling will be displayed.
To clear the memory:
• Press and hold [MEMORY] for 2 seconds.
If you press [MEMORY] now, the maximum and minimum recordings
will have the same values as the current ones until different readings
Falling are recorded.
HOW TO USE CHANNEL-1 TEMPERATURE/
Upper and lower temperature and humidity limits for Channel-1 can
Falling be set so that an alarm activates when the limits are exceeded.
The high and low temperature and humidity displays are selected
by sequentially pressing [ HI/LO ].
8
8
AND HUMIDITY
HUMIDITY ALARM
08/10/2001, 12:17 PM