Temperature, Humidity & Pressure; Maximum And Minimum Temperature; How To Use Channel-1 Temperature/ Humidity Alarm - Oregon Scientific BAR122HG User Manual

TEMPERATURE, HUMIDITY & PRESSURE
TREND INDICATORS
The temperature-trend, humidity-trend and pressure trend indicators
show the trends of collected readings. Arrows indicate a rising,
steady or falling trend.
Arrow indicator
Temperature
Rising
Trend
Arrow indicator
Rising
Humidity Trend
Arrow indicator
Rising
Pressure Trend
Note: If the readings goes above or below the measuring range of
the main unit or the remote unit ( stated in specification), the display
will show "HHH" or "LLL".
Steady Falling
Steady Falling
Steady Falling

MAXIMUM AND MINIMUM TEMPERATURE

AND HUMIDITY
The maximum and minimum recorded temperature and humidity
readings will automatically be stored in the memory.
To display the maximum and minimum display memory:
1. Select the channel to be checked.
2. Press [MEMORY] once to display the maximum temperature
and humidity and again the minimum temperature and humidity.
The respective indicators, MAX or MIN will be displayed.
To clear the memory:
• Press and hold [MEMORY] for 2-seconds.
If you press [MEMORY] now, the maximum and minimum recordings
will have the same values as the current ones until different readings
are recorded.
HOW TO USE CHANNEL-1 TEMPERATURE/
HUMIDITY ALARM
Upper and lower temperature and humidity limits for channel-1 can
be set so that an alarm activates when the limits are exceeded.
The high and low temperature and humidity displays are selected
by sequentially pressing HI/LO.
8