Before Installation; Manufacturer's Statement; Parts Identification; Accessories - Optex INS-HX-80N Installation Instructions Manual

Before installation

- Manufacturer's statement

Symbol
Failure to follow the instructions provided
Warning with this indication and improper handling
may cause death or serious injury.
Failure to follow the instructions provided
Caution
with this indication and improper handling
may cause injury and/or property damage.
Warning
Destroy
Disassemble
modify
Intentional watering

- Parts identification

PIR detector
PIR cover
Camera unit
Meaning
Caution
Bracket angle adjusting screw
Camera angle adjusting screw
Symbol
Nix sign indicates prohibition.
Check mark indicates recommendation.
Special attention is required to the section
NOTE
of this symbol.
Mounting height
2.5 m (8' 2" ) to 3.0 m (10' )
Mounting on
an unstable
wall
Mounting plate
Back cover
2
Meaning
Tilt

- Accessories

4 x 20 mm
Mounting screws
T20 Torx wrench
Waterproof cap
for LAN connection