Others; Specifications; Dimensions - Optex INS-HX-80N Installation Instructions Manual

Others

- Specifications

Model
Detection method
PIR coverage
PIR zones
PIR distance
Detectable speed
Sensitivity
Power input
Alarm period
Warm-up period
Alarm output
Tamper output
LED indicator
Image sensor
Viewing angle
Minimum illumination
IR illumination
Night vision
Image compression
Resolution/ frame rate
Network protocol
Security
Operation temperature
Environment humidity
International protection
Mounting
Mounting height
Weight
Accessories
• Specifications and designs are subject to change without prior notice.
•
These units are designed to detect an intruder and activate an alarm control panel.
Being only a part of a complete system, we cannot accept responsibility for any
damages or other consequences resulting from an intrusion.

- Dimensions

INS-HX-80N
Passive infrared
24 m x 2.0 m (80' x 6'7") narrow
20 zones
6.5 m (22'), 10 m (33'), 13 m (43'),
0.3 to 1.5 m/s (1' to 5'/s)
2.0℃ ( 3.6°F) at 0.6 m/s
PoE (IEEE 802.3af compliant)
Mini-jack 12 V DC 420 mA max.
Terminal 9.5 to 18 V DC/ 35 mA max. at 12 V DC
2.0 ± 1 s
Approx. 60 s (LED blinks)
N.O./N.C. switchable, 28 V DC 0.1 A max.
N.C. 28 V DC 0.1 A max.
Open when the cover is opened
[1] Warm-up
1/2.8" CMOS
H: 114° V: 61°
Color: 0.02 lux. 0 lux. with IR
Visible up to 12 m
Day & Night Automatic/Manual switching
H.264, H.265, MJPEG
1080/ 30 fps, D1 (704 x 480 or 704 x 576)
IPv4: TCP/IP, UDP, RTP(UDP/TCP), RTSP, NTP, HTTP,
HTTPS, SSL, DHCP, SNMPv1/v2/v3(MIB-2), ONVIF
HTTPS(SSL), IP filtering, 802.1x, Digest authentication (ID/PW)
-30℃ to +50℃(-22°F to +122°F)
95% max.
IP 55
Wall (Outdoor, Indoor)/Gang box
2.5 to 3.0 m (8'2" to 10')
1.2 kg (42.3 oz)
[1] Mounting screw (4 x 20 mm) x 2
[2] T20 Torx wrench x 1
[3] Waterproof cap for LAN connector x 1
353 (13.90)
14
18 m (60'), 24 m (80')
Default:
[2] Alarm
84 (3.31)
Unit: mm (inch)