Before Installation; Parts Identification; Accessories; Manufacture' S Statement - Optex InSight INS-QXI-ST Installation Instructions Manual

Before installation

- Parts identification

PIR detector
PIR cover

- Manufacture' s statement

Symbol
Failure to follow the instructions provided
Warning with this indication and improper handling
may cause death or serious injury.
Failure to follow the instructions provided
Caution
with this indication and improper handling
may cause injury and/or property damage.
Warning
Caution
Mounting height
2.2 m (7' 3" ) to 2.7 m (8' 11" )
Bracket angle adjusting screw
Camera unit Camera angle adjusting screw
Meaning
Mounting plate
Back cover
Symbol
Nix sign indicates prohibition.
Check mark indicates recommendation.
Special attention is required to the section
NOTE
of this symbol.
Tilt
- 2 -

- Accessories

4 x 20 mm
Mounting screws
T20 Torx wrench
Section
"e"
PIR area masking strips
(Both side "e" are attached
to the lens in the factory)
Waterproof cap
for LAN connection
Meaning