APPENDIX
Firmware Release V.0083 and Newer (continued)
3.
COPY LOADER FILE TO TRAXALL ROOT DIRECTORY
Locate the firmware loader file (Traxall770.ldr or Traxall720.ldr)
on your PC. Copy this file to your
Traxall root directory.
When file transfer is complete, "eject" the
Traxall from the PC as you would any USB
device. Remove USB cable.
4.
POWER DOWN TRAXALL
5.
RESTART TRAXALL
The screen will remain white/light grey for about three minutes, then
shut down.
6.
RESTART TRAXALL AGAIN
Verify the new version is displayed in
startup screen. The Firmware update is
now complete.
Contact CDI support@pigging.com or
1-800-580-4234 if you require Firmware upgrade assistance.
TRAXALL 700 SERIES USER GUIDE
Page 78 of 84