SYSTEM MENU
TRAXALL 700 SERIES USER GUIDE
APPENDIX
APPENDIX
System Menu Tree
Relay Options
Set up and program the two RELAYS for various pulse train behavior.
The relay contacts can be used for passage annunciation (lights, horns,
etc.), a very useful feature where an unmanned passage must be
monitored.
RELAY ONE and/or RELAY TWO can be set
for NORMALLY OPEN, NORMALLY CLOSED,
TIME ON or OFF, CYCLES, LATCH, and RESET.
Relay State indicates current status at time
of configuration.
TIME ON/OFF dwell times can be set from 1 to 60 second duration.
red
until confirmed by
8
Values are displayed in
, at which point values
are shown in black.
Page 40 of 84