CDI TRAXALL 770 User Manual page 49

APPENDIX
GPS Setup and Operation
From the GPS menu, use pq to access GPS On/Off checkbox, then u
to check. This will enable the GPS.
8
or
Once enabled, it will begin searching
for GPS satellites. When three
satellites are acquired, the signal
strength indicator bars will change
from dark green to light green
and the GPS dial will become
active.
The GPS is now ready for
• Setting waypoints
• Navigating to waypoints
• Recording a traverse
TRAXALL 700 SERIES USER GUIDE
Page 49 of 84
GPS MENU
"GOLF TEE"
POINTER
CLOSING
DISTANCE
HEADING