APPENDIX
Backlight Adjustment
TRAXALL LCD brightness is automatically adjusted for optimal visibility
and battery life by the built-in Automatic Light Sensor (ALS). The LCD
will also "go blank" (turn off) after one minute of non-use. But you can
override the ALS by controlling both brightness and blanking intervals
through this menu.
Use the pq to access MAN LEVEL to
adjust LCD brightness to your preferred
(1–5) level.*
Values selected for change are displayed
red
until confirmed by pressing
in
which point values are shown in black.
Blanking delay can be set in ten-second
increments from 10–60 seconds, or
None.
* ALS levels are 1 through 4. Level 5 is
accessible only in manual mode and should
be used only when necessary (i.e., when
working under bright sunlight) as it can draw
extra battery current.
TRAXALL 700 SERIES USER GUIDE
8
, at
Page 47 of 84
SYSTEM MENU