I/O Connections - CDI TRAXALL 770 User Manual

I/O CONNECTIONS

TRAXALL 700 SERIES USER GUIDE
OVERVIEW
I/O Connections
Relay Port
A 12-pin connector provides CDI
LineStat satellite radio connection,
I/O, and programmable relay contacts
which are programmable to varying
patterns.
USB
When connected to a laptop or PC,
TRAXALL will register as a mass storage
device on the host PC.
At connection, the TRAXALL may
display a 'Syncing' message. All other
TRAXALL functionality is off during
a PC–USB connection.
Bluetooth
TRAXALL'S built-in Bluetooth will let you monitor
and operate your TRAXALL receiver from a remote
location (for example,
a vehicle cab or shelter
during inclement
weather) on a laptop or
PC over an approximate
maximum distance of
330 ft [100 m].
Page 11 of 84