Network Stack Configuration; Usb Power Control - DFI EHL556 User Manual

► Advanced

Network Stack Configuration

Aptio Setup - AMI
Advanced
Network Stack [Enabled]
Ipv4 PXE Support [Disabled]
Ipv6 PXE Support [Disabled]
PXE boot wait time 0
Media detect count 1
Version 2.22.1282. Copyright (C) 2022 AMI
Network Stack
Enable or disable UEFI network stack. The following fields will appear when this field is en-
abled.
Ipv4 PXE Support
Enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be avail-
able.
Ipv6 PXE Support
Enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be avail-
able.
PXE boot wait time
Set the wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric
keys to set the value.
Media detect count
Set the number of times the presence of media will be checked. Use either +/- or numeric keys
to set the value.
User's Manual | EHL556
► Advanced

USB Power Control

Enable/Disable UEFI Net-
USB2_0/1 USB3_0/1
work Stack
USB2_4/5
USB2_6/7
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
5V / 5V_DUAL
5V Dual supports wake up from S3/S4 state by USB keyboard or mouse while 5V does not.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
[5V_Dual]
[5V_Dual]
[5V_Dual]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Chapter 3
BIOS SETTINGS
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
35