Power & Performance; Pch-Fw Configuration - DFI EHL556 User Manual

► Advanced
Power & Performance
Aptio Setup - AMI
Advanced
Power & Performance
Intel(R) SpeedStep(tm) [Enabled]
Turbo Mode [Enabled]
C states [Enabled]
Version 2.22.1282. Copyright (C) 2022 AMI
Intel(R) SpeedStep(tm)
This field is used to enable or disable the Intel SpeedStep
the balance between system's power consumption and performance. After it is enabled in the
BIOS, EIST features can then be enabled via the operating system's power management.
Turbo Mode
Enable or disable turbo mode of the processor. This field will only be displayed when EIST is
enabled.
C states
Enable or disable CPU Power Management. It allows CPU to enter "C states" when it's idle and
nothing is executing.
User's Manual | EHL556
Allows more than two fre-
quency ranges to be sup-
ported.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Technology, which helps optimize
®
► Advanced

PCH-FW Configuration

Aptio Setup - AMI
Advanced
Me State [Enabled]
XFirmware Update Configuration
Version 2.22.1282. Copyright (C) 2022 AMI
Me State
This field is used to enable or disable the ME FW Image Re-Flash function, which allows the
user to update the ME firmware.
Firmware Update Configuration
X
To config firmware update.
Me FW Image Re-Flash
This field is used to enable or disable the ME FW Image Re-Flash function, which allows
the user to update the ME firmware.
Chapter 3
BIOS SETTINGS
Allows the user to update
the ME firmware.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
29