Control 4 C4-KNX-THERM Series User Manual page 91

Number Name
34 Display backlighting
The display backlighting is activated with value (1) and deactivated with value (0) via the 1-bit
communication object.
Note
This function is mainly used in rooms where backlighting during the night is
considered to be a disturbing factor, such as in hotel rooms and bedrooms.
Number Name
35 1. On/off request (master)
2. On/off request (slave)
This 1-bit communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
Number Name
36 1. Setpoint display (master)
2. Setpoint display (slave)
This 2-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
Number Name
37 1. Request setpoint (master)
2. Request setpoint (slave)
This 1-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
Number Name
38 1. Confirm setpoint (master)
2. Confirm setpoint (slave)
This 1-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
Description of application and parameters
Object function
Input / output
Object function
Input
Input
Object function
Input / output
Input / output
Object function
Input
Input
Object function
Input / output
Input / output
Application program
Data type
Switching
Data type
Switching
Switching
Data type
2-byte floating point
value
2-byte floating point
value
Data type
Percent (0..100%)
Percent (0..100%)
Data type
Percent (0..100%)
Percent (0..100%)
│91