Control 4 C4-KNX-THERM Series User Manual page 103

Different switching processes are triggered with each new actuation of the 1st or 2nd button.
For example:
■
First actuation (2nd button) switches lamp 1 on.
■
Second actuation (2nd button) switches lamp 1 off and lamp 2 on.
■ Third actuation (2nd button) switches lamp 2 off and lamp 3 on.
■
Fourth actuation (1st button) switches lamp 3 off and lamp 2 on.
■ Fifth actuation (1st button) switches lamp 2 off and lamp 1 on.
■
etc.
Up to five switching levels can be activated.
The application differentiates between whether the 1st or 2nd button was actuated. Depending
on the setting, one lower or one higher level can be switched to.
Parameter
General parameter
Number of objects
Evaluation period (s)
Additional Parameters
Working mode of the
buttons
Sending of objects
Object values
Bit pattern of the object
values
Objects
No. Object name
0 Switching step 1
1 Switching step 2
2 Switching step 3
3 Switching step 4
4 Switching step 5
Description of application and parameters
Setting options
1 - 5
1.0 - 5.0
Setting options
■
1st button Up, 2nd button Down
■
1st button Down, 2nd button Up
■
At actuation
■
At change of value
■
Normal
■
Inverse
■
1 off n
■
x off n
Application program
Comments
–
–
Comments
–
–
–
–
Data type
1 bit EIS1 / DPT 1.001
1 bit EIS1 / DPT 1.001
1 bit EIS1 / DPT 1.001
1 bit EIS1 / DPT 1.001
1 bit EIS1 / DPT 1.001
Flags
C, W, T
C, W, T
C, W, T
C, W, T
C, W, T
│103