Caution! The device can sustain damage when coming into contact with
hard objects!
The plastic parts of the device are sensitive.
–
Pull the attachment off only with your hands.
–
Do not lever parts off with screwdrivers or similar hard objects.
Installation only in dry interior rooms on a flush-mounted bus/network coupler, which is to be
ordered separately.
■
Observe the currently valid regulations.
■
Observe the installation instructions.
■
The cover frame must be ordered separately.
Installing the unit
To install the device, perform the following steps:
Fig. 10:
Pulling the rocker off
Fig. 11:
Plugging the device on
Notes on the instruction manual
1. Pull the bottom rocker off the device.
2. Plug the device onto the bus/network
coupler.
│21