Control 4 C4-KNX-THERM Series User Manual page 113

With the "Light scene actuator" application it is possible to call up scenes that are stored in the
device via the receipt of a scene number on the 1-byte communication object "Scene call-up". A
maximum of eight scenes with up to eight actuator objects can be created.
For triggering different actuators, the size of the actuator groups communication objects can be
set under the "Actuator group type" parameter.
The user has the option of saving the scenes himself. A corresponding save telegram must be
received for this (see the description of the individual parameters).
Light scene actuator objects
No. Object name
0 Light scene call-up (1 byte)
1 - 10 Actuator group A [B - J] (1-bit switching)
Actuator group A [B - J] (1-bit blind)
Actuator group A [B - J] (1 byte 0 - 100%)
Actuator group A [B - J] (1-byte light scene
number)
Actuator group A [B - J] (Temperature value
absolute)
10 - 19 Enable scene 1 [Scene 2 - Scene 10]
Description of application and parameters
Data type
1 byte / DPT18.001
1 bit EIS1 / DPT 1.001
1 bit EIS7 / DPT 1.008
1 byte EIS6 / DPT 5.001
1 byte / DPT 18.001
2 byte EIS5 / DPT 9.001
1 bit EIS1 / DPT 1.001
Application program
Flags
C, W, U
C, W ,T ,U
C, W ,T ,U
C, W ,T ,U
C, W ,T ,U
C, W ,T ,U
C, W, T
│113