Table of Contents
Advertisement
Note
An external temperature measurement for room control may be practical for
larger rooms and/or floor heating.
Number
Name
7
External actual temperature
2-byte communication object for reading an external temperature value provided via the KNX
bus.
Number
Name
8
External actual temperature 2
2-byte communication object for reading an additional external temperature value provided via
the KNX bus.
Number
Name
9
1. Fault, actual temperature
2. Fault, actual temperature
(master)
3. Fault, actual temperature
(slave)
If one of the parameterized input temperatures is unavailable to the controller for a period longer
than the monitoring time, the controller enters the error mode. The error mode is sent to the bus
as the value 1.
Note
About item 2:
This object must be connected to the "Fault, actual temperature (slave)" object
in order to indicate the error mode.
About item 3:
This object must be connected to the "Fault, actual temperature (slave)" object
in order to indicate the error mode.
Number
Name
10
Local actual temperature
Not visible!
Description of application and parameters
Object function
Input
Object function
Input
Object function
Output
Output
Output
Object function
Output
Application program
Data type
2-byte floating point
value
Data type
2-byte floating point
value
Data type
Switching
Switching
Switching
Data type
Switching
│81
Advertisement
Table of Contents
