Table of Contents
Advertisement
Fig. 12:
Fixing the device
Fig. 13:
Plugging the rocker on
Fig. 14:
Twist protection of the rocker
Installing the label
To install the label, perform the following steps:
1
Fig. 15:
Installing the labelling field
2
Notes on the instruction manual
3. Fix the device with the supplied
screw.
4. Plug the rocker back onto the device.
–
The rockers have twist protection
to ensure that they are attached
the right way around. The lower
web is wider.
The device is now mounted.
1. Remove the protective cover of the
labelling field.
2. Replace the label and reinsert the
protective cover.
–
To ensure that the protective
cover is inserted the right way
around, the notches are designed
differently. Hold the protective
cover as shown in the illustration.
–
First insert the left [1] and then
the right side [2].
The label is installed.
│22
Advertisement
Table of Contents
