Ht818 Leds Pattern; Configuration Guide - Grandstream Networks HT818 Administration Manual

HT818 LEDs Pattern

There are four (4) LED types that help you manage the status of your HT818.
LED Lights Status
Power LED The Power LED lights up when The HT818 is powered on and it flashes when the HT818 is booting up
WAN LED The WAN LED lights up when The HT818 is connected to your network through the WAN port.
LAN LED The LAN LED lights up when The HT818 is connected to your network through the LAN port.
The phone LEDs indicate status of the respective FXS port-phone on the back panel
OFF – Unregistered
Phone LED 1- 8
ON (Solid Blue) – Registered and Available
Blinking every 500 ms – Off-Hook / Busy
Slow blinking – FXS LEDs indicates voicemail

CONFIGURATION GUIDE

The HT818 can be configured via one of two ways:
The IVR voice prompt menu.
The Web GUI embedded on the HT818 using PC's web browser.
Figure 3: Connecting the HT818
Figure 4: HT818 LEDs Pattern
Table 4: HT818 LEDs Pattern Description