Scenario 1: Connecting The Ht818 Using Wan Port; Scenario 2: Connecting The Ht818 Using Lan Port - Grandstream Networks HT818 Administration Manual
Hide thumbs
Also See for HT818:
- Administration manual (75 pages) ,
- User manual (42 pages) ,
- Quick installation manual (21 pages)
Table of Contents
Advertisement
WAN
Connects the phone adapter to your router, switch or modem using an Ethernet RJ45 network cable.
co
LAN
Connects the phone adapter to your PC or switch using an Ethernet RJ45 network cable.
DC Power
Connects the phone adapter to PSU (12V – 1.5A).
Reset
Factory reset button. Press for 7 seconds to reset factory default settings.
Connecting HT818
The HT818 is designed for easy configuration and easy installation, to connect your HT818, please follow the steps below:
Scenario 1: Connecting the HT818 using WAN Port
When connecting HT818 using the WAN port, it will act as simple DHCP Client.
1. Insert a standard RJ11 telephone cable into the phone ports and connect the other end of the telephone cable to a standard
touch-tone analog telephone.
2. Connect the WAN port of the HT818 to a router, switch or modem using an Ethernet cable.
3. Insert the power adapter into the HT818 and connect it to a wall outlet and make sure to respect the technical specifications of the
power adapter used.
4. Power, WAN and Phone LEDs will be solidly lit when the HT818 is ready for use.
Scenario 2: Connecting the HT818 using LAN Port
When connecting the HT818 using the LAN port, it will act as a router and DHCP serving addresses, the devices connected with HT818
LAN will pull DHCP addresses from your HT818.
1. Insert a standard RJ11 telephone cable into the phone ports and connect the other end of the telephone cable to a standard
touch-tone analog telephone.
2. Connect a computer or switch to the LAN port of the HT818 using an Ethernet Cable.
3. Insert the power adapter into the HT818 and connect it to a wall outlet and make sure to respect the technical specifications of the
power adapter used.
4. Power, LAN and Phone LEDs will be solidly lit when the HT818 is ready for use.
Please make sure to enable NAT Router under Web GUI �� Basic Settings ��Device Mode.
Table 3: Definition of the HT818 Connectors
Advertisement
Table of Contents
