Grandstream Networks HT818 Administration Manual page 15

Statically configured as IP address
IPv6 Address
Enable Management Interface
Management Access
Enable SNMP Through Management
Interface
Management Interface IPv4 Address
Time Zone
Self-Defined Time Zone
Allow DHCP server to set Time Zone
Language
Reset Type
Configure IP address, subnet Mask, default router IP address, 1st preferred DNS server,
2nd preferred DNS server. These fields are set to zero by default.
Allows users to configure the appropriate network settings on the HT80x to obtain IPv6
address. Users could select "DHCP", "Static IP". By default, it is set to "DHCP".
● DHCP mode: all the field values for the static IP mode are not used (even though they are
still saved in the flash memory.) The HT801/HT802 acquires its IP address from the first
DHCP server it discovers from the LAN it is connected.
● Static IP mode: configure IP address, 1st and 2nd DNS server, preferred DNS server. These
fields are set to zero by default.
● Full Static: When enabling the option full static, users need to specify the Static IPv6 and
the IPv6 Prefix length.
● Prefix Static: When enabling the option prefix static, users need to specify the IPv6 Prefix
(64 bits).
Allows administrator to setup a Virtual Network Interface on top of the physical interface for
device management. Default is No.
Chooses whether to access using "Management Interface Only" (Default) Or "Both Service
and Management Interfaces"
This feature allows users to route SNMP packets through management interface. Default
setting is No.
Configures Voice VLAN Type :
● Default is dynamically assigned via DHCP
Or,
● statically configured as:
○ IP Address : Default is 192.168.100.100
○ Subnet Mask : Default is 255.255.255.0
○ Default Router : Default is 192.168.100.1
○ DNS Server 1 : Default is 0.0.0.0
○ DNS Server 2 : Default is 0.0.0.0
● 802.1Q/VLAN Tag
vlan tagging : [0 – 4094]; Default is 0
● 802.1p priority value :
priority : [0 – 7]; Default is 0
Selects time zone to define date/time on the device.
Allows users to define their own time zone.
Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it will override
selected time zone. If set to "No", the analogue adapter will use selected time zone even if
provided by DHCP server.
The Default setting is Yes.
Configures the languages of the voice prompt and web interface, except Spanish that it is only
in IVR. Available languages: English, Chinese, Traditional Chinese, Russian, Spanish IVR.
Gives the administrator the option to restore default configuration on the HT801/HT802.
There are 3 types of factory reset:
● ISP Data Reset: All VoIP related configuration (mainly everything located on FXS page).