Table of Contents
Advertisement
Available languages
Available languages
Content
Introduction ............................... 17
Intended purpose ....................... 17
General description .................... 17
Scope of delivery ............................18
Description of functions ....................18
Overview .......................................18
Technical Data ............................ 18
Notes on safety.......................... 19
Symbols and icons ..........................19
General notes on safety ...................19
for Power Tools ...............................19
Residual risks ..................................23
Initial start-up ............................ 23
Securing the disc sanding device ......23
the sanding table ............................23
Replacing sanding paper .................23
Setting the sanding table angle .........24
Using an angle stop ........................24
Operation .................................. 24
Switching on and off .......................24
Sanding .........................................25
Cleaning .................................... 25
Transport ................................... 25
Maintenance .............................. 25
Storage ...................................... 25
protection .................................. 26
Guarantee ................................. 26
Repair Service ............................ 27
Service-Center ............................ 28
Importer .................................... 28
of conformity ........................... 109
Exploded Drawing ................... 117
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a fi nal inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating and
safety instructions. Use the product
only as described and for the appli-
cations specifi ed.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Intended purpose
The disc sanding device is suitable for
sanding soft and hard woods.
The device is intended to be used by do-it-
yourselfers. It was not designed for heavy
commercial use.
The tool is not to be used by persons.
under the age of 16. Children over the
age of 16 may use the tool except under
supervision. The manufacturer is not liable
for damage caused by an improper use or
incorrect operation of this device.
General description
An illustration of the most im-
portant functional components
can be found on the front fold-
out page.
GB
17
Advertisement
Chapters
Table of Contents
