Hour Lube And Maintenance Checks - Komatsu 730E Operation & Maintenance Manual

Dump truck
Hide thumbs Also See for 730E:
Table of Contents

Advertisement

Maintenance - Section 40
Page 40-4
10 HOUR LUBE AND MAINTENANCE
CHECKS
Truck Serial Number______________________
Hourmeter_____________
1.
MACHINE - Inspect the entire truck for leaks, worn
parts, and damage. Repair as necessary.
2.
TURBOCHARGERS - Check for leaks, vibration, or
unusual noise.
3.
ALTERNATOR - Check the alternator, belt condition,
and alignment.
4.
RADIATOR - Check the coolant level and fill with the
proper mixture, as shown in the Cooling System Anti-
freeze Recommendation chart in this section. Refer to
the engine service manual for the proper DCA levels.
5.
ENGINE - Check the oil level. Refer to the engine
manufacturer's service manual for oil recommenda-
tions.
6.
AIR CLEANERS - Check the air cleaner vacuum
gauges in the operator cab. The air cleaner(s) must
be serviced if the maximum restriction reaches: 6.2
kPa (25 in. of H
0). See Section C of the Shop man-
2
ual for servicing the air cleaner elements. Empty the
air cleaner dust caps.
NOTE: After service, push the reset button on the
face of the gauge to allow the gauge to return to zero.
7.
WHEELS AND TIRES - FRONT AND REAR
a. Verify the tires are properly inflated.
b. Inspect the tires for abnormal wear or dam-
age.
c. Check for embedded debris in the tires.
After each wheel installation, recheck the tightness of
the wheel nuts after approximately five hours of oper-
ation. Check again at the end of the shift, and then
periodically until all the nuts remain at 610 N·m (450
ft lbs).
8.
BODY-UP SWITCH - Clean the sensing area of the
switch.
9.
HOIST LIMIT SWITCH - Clean the sensing area of
the switch.
10. HYDRAULIC TANK - Check the oil level in the tank.
The oil must be visible in the top sight glass. Add oil, if
necessary, but do not overfill.
Refer to Hydraulic Tank Service in this section for
additional information.
Use Lube Key B.
Site Unit Number_______________
Name of Service Technician___________________________________
TASK
Lubrication and Service
Date_______________
COMMENTS
CHECKED INITIALS
OM4042

Advertisement

Table of Contents
loading

Table of Contents