Center Console; Truck Controls - Komatsu 730E Operation & Maintenance Manual

Operation - Section 32
Page 32-6

CENTER CONSOLE

1. Center Console
2. F-N-R Selector Switch
3. Hoist Control Lever
4. Ashtray
5. Cigarette Lighter
6. LH Window Control Switch
7. RH Window Control Switch
8. Engine Shutdown Switch
9. Override Switch
10. Blank - Not used on this truck
11. RSC ON/OFF Switch
12. Retarder Speed Control (RSC)
Dial
13. Statex III Download Port
14. Engine Diagnostic Port (CENSE)
15. Modular Mining Port (Optional)
16. Passenger Seat (mounted on top
of the right-hand portion of the
console)
17. Engine Diagnostic Connectors
(Optional Quantum/Centry)
18. Engine Diagnostics Connector
(Optional)
19. Data Storage Button

TRUCK CONTROLS

F-N-R Selector Switch
F-N-R selector switch (2, Figure 32-7) is mounted on a
console to the right of the operator's seat. It is a three-
position switch that controls the forward-neutral-
reverse motion of the truck. When the selector switch
handle is in the center N position, it is in NEUTRAL.
The handle must be in NEUTRAL to start the engine.
The operator can select forward drive by
moving the handle forward.
Reverse drive can be selected by moving
the handle rearward.
The truck must be stopped before the selector han-
dle is moved to a forward or reverse drive position.
FIGURE 32-7. CENTER CONSOLE
OM3214
Operator Cab and Controls