Advertisement
Disassembly Procedures
Disassembling process of indoor unit
Operation procedures/pictures
Disassemble the front panel
Pull the panel open. And pull out the wiring
terminal, pull the panel outward with force
along the groove fixing the panel of the body
case to remove the panel as shown in Fig.
7-1.
Disassemble filter
Push the filter in the middle, to make the clasp
out of the groove, then can take down the filter.
As shown in Fig. 7-2.
Disassemble the guide louver
Bend the guide louver, then take it
out. As shown in Fig. 7-3.
Golden Peak Series
Front panel
Fig.
Filter
Fig.
Guide louver
Fig.
Displayer
Advertisement
