Disassembly And Assembly Procedures - Gree Cooling Bay Series Manual

Disassembly and Assembly Procedures

7 7 7 7 7
Disassembly Process of Indoor Unit
Operating Procedures / Photos
1.Disassemble Air Inlet Panel
Take out the screw caps and unscrew the screw both at
left and right side. Remove the outside plate downwards
slightly to take out air inlet panel.
2.Disassemble Air Outlet Panel
Unscrew the 2 screws under air outlet panel and 5 screws
on the plate and then lift the panel upwards to make it off
the left and right side plate.
Unscrew the 4 screws at the back of air outlet plate and
fixing controller box cover to pull out wiring terminal.
Unscrew the screws fixing stepping motor to take the
stepping motor and the air inlet panel out.
Screw cap
Screw
Controller box cover
Screw
Stepping motor
３０
Cooling Bay Series
Screw
Screw