Table of Contents
Advertisement
3. Inserting the electronic flash.
Checking the electronic flash
Loading the batteries
Insert two of any of the following types of batteries: LR6 alkali batteries, lithium batteries,
nickel-manganese batteries, MH batteries, Ni-Cd batteries (KR-15/51) or Oxyride
batteries (XR6Y) as shown in the illustration. The CR-V3 lithium battery pack (Olympus
product LB-01) can also be loaded.
* "AA"-size manganese batteries cannot be used.
"AA"-size batteries
Checking the batteries
Note：・To avoid running out power during shooting, it is recommended to load fully
charged batteries before every diving session.
Inserting into the case
Which electronic flashes can be used?
The product (PFL-E01) is exclusively for use with the FL-36 Electronic Flash.
Open the battery compartment cover.
Insert batteries in the correct orientations.
Close the battery compartment cover.
CR-V3
Press the power button to switch the
electronic flash on.
Confirm that the charge lamp lights up.
Press the power button again to switch
the electronic flash off.
E-14
En
Advertisement
Table of Contents
