Insertion Of The Electronic Flash; Checking The Electronic Flash; Checking The Batteries; Inserting In The Case - Olympus PFL-01 Instruction Manual

3. Inserting the electronic flash.

Checking the electronic flash

Load batteries into the electronic flash and perform the flash check
before inserting the flash in the case.

Checking the batteries

Load two LR6 alkaline batteries, two lithium batteries, two Ni-Mn
batteries, two Ni-Mh batteries or two Ni-Cd batteries as shown
below.
Manganese batteries cannot be used.
Set the mode dial to AUTO.
When the charge lamp lights up, press the test button and
ensure that the flash emits light.
Note: • To avoid running out power during shooting, it is recommended
to load fully charged batteries before every diving session.
Inserting into the case

Which electronic flashes can be used?

The product (PFL-01) is exclusively for use with the FL-20
Electronic Flash.
E-16